Friday, December 13, 2024
HomeForexSMC EA(ExpertSMC) Consumer Information - Analytics & Forecasts - 8 April 2024

SMC EA(ExpertSMC) Consumer Information – Analytics & Forecasts – 8 April 2024


The Inputs Instructions

Once you first use SMC EA, please keep in mind its primary logic.

Select one and just one entry sign might be chosen. When the entry sign outputs an extended route, if no filtering sign is added, the order might be positioned instantly. If a number of filtering alerts are added, all of those filtering alerts should generate an extended route on the identical time earlier than inserting an order. So long as one filtering sign doesn’t generate an extended route, it doesn’t meet the situations for putting an order. This system permits including filtering alerts beneath two TFs, and a number of filtering alerts might be added beneath every TF. Particular consideration needs to be paid right here to the choice setting of sign validity interval(Final Sign Expiration) for every filtered sign. This selection is to increase the time of a sure sign, as many alerts are solely generated on a sure bar.

For instance: 

If my technique is to position an order if FVG seems inside 10 bars after the primary line and sign line of MACD intersect. So I ought to set it this fashion:

  1. First, choose FVG because the entry sign, and set the specified bull/bear sign mode and entry mode within the FVG Sign Parameters space. Right here, we need to enter the market instantly after FVG seems, so we select “FVG Shaped” for the “Sign Bull/Bear Sample Utilization” and “Commerce at Market Value” for the “Sign Entry Sample Utilization”. 
  2. The second step is to set the required SL and TP. You possibly can select fastened Pips or ATRs, or select to make use of the SL and TP supplied by the entry sign or filter sign.
  3. The third step is to set Timeframe1 to “Present”, activate MACD filter on Timeframe1, and set “Sign Bull/Bear Sample Utilization” to “Search for an intersection of the primary and sign line” within the “Inputs FOR TIMEFRAME1 FILTER SIGNAL” part. Set “Final Sign Expiration” to 10.

===========INPUTS FOR EXPERT===========

  • EA Magic Quantity: a novel identifier that distinguishes between completely different orders or trades positioned by an Knowledgeable Advisor (EA). Ensure that every EA you might be utilizing has a special magic quantity.

  • EA Run in Each Tick: This parameter is used to determine on worth motion checks if will probably be executed on tick or on the formation of a 1 minute. At present, all alerts don’t require an On Tick degree, so the default setting is fake.

===========INPUTS FOR ENTRY SIGNAL===========

———–Normal Settings———–

  • Choose Foremost Sign for commerce: Right here, we choose the entry alerts for buying and selling. This system has 10+ built-in entry alerts for choice, and the entry alerts might be additional expanded in response to person wants sooner or later. After deciding on the entry sign, it’s essential to set the parameters of the sign within the corresponding sign parameter setting space.

  • Choose SL Kind: There are 6 sorts to decide on. 

    1. No SL: No cease loss is about for orders.
    2. SL in Factors: Set a hard and fast variety of factors because the cease loss for the order.
    3. SL in ATRs: Set a hard and fast a number of ATRs because the cease loss for the order.
    4. Swing Excessive/Low: Use the current swing excessive as a cease loss for brief orders and the current swing low as a cease loss for lengthy orders.
    5. SL Supplied by Entry Sign: Use the cease loss kind set by the entry sign because the cease loss for the order. Every entry sign could present a number of cease loss sorts, which might be set within the entry sign parameter setting space.
    6. SL Supplied by Filter: We could have added a number of filtering alerts to the entry sign, every of which may present a special cease loss kind. Right here, we are able to select the cease loss kind supplied by the filtering sign because the cease loss for the order.  Every filtering sign could present a number of cease loss sorts, which might be set within the filtering sign parameter setting space.
  • —ATR Peroid: If SL in ATRs is chosen above, the ATR Interval must be set right here.

  • —Cease Loss degree (in pips/ATR): Set particular numerical values for SL in Pips or SL in ATRs. If the variety of decimal digits of the value is 3 or 5, 1Pips = 10Points, else 1Pips = 1Point.

  • Choose TP Kind:  There are 7 sorts to decide on.

    1. No TP: No take revenue is about for orders.
    2. TP in Factors: Set a hard and fast variety of factors because the take revenue for the order.
    3. TP in ATRs: Set a hard and fast a number of ATRs because the take revenue for the order.
    4. “X” SL: Use a hard and fast a number of of SL because the take revenue for the order.
    5. Swing Excessive/Low: Use the current swing excessive as a take revenue for lengthy orders and the current swing low as a take revenue for brief orders.
    6. TP Supplied by Entry Sign: Use the take revenue kind set by the entry sign because the take revenue for the order. Every entry sign could present a number of take revenue sorts, which might be set within the entry sign parameter setting space.
    7. TP Supplied by Filter: We could have added a number of filtering alerts to the entry sign, every of which may present a special take revenue kind. Right here, we are able to select the take revenue kind supplied by the filtering sign because the take revenue for the order.  Every filtering sign could present a number of take revenue sorts, which might be set within the filtering sign parameter setting space.
  • —Take Revenue degree (in pips/ATR):  Set particular numerical values for TP in Pips or TP in ATRs.   If the variety of decimal digits of the value is 3 or 5, 1Pips = 10Points, else 1Pips = 1Point.

  • —TP “X” Worth: Set the “X” values for “X” SL chosen above.

  • MS Size (Depth) for Swing Excessive/Low:  That is used for the smc indicator that’s applied to research market construction, and it has an affect on the place to set the SL/TP if the choice Swing Excessive/Low is used.

  • Expiration of pending orders (in bars):  This parameter will mean you can set an expiration time for your orders, 0 means no expiration time is about, 2 signifies that the expiration time of the order is 2 bars. For instance, when buying and selling on the 1 hour, 2 signifies that the expiration time of the order is 2 hours.

  • Most variety of orders: The utmost variety of orders allowed by EA, which can embody the prevailing positions.

  • Breakeven when earlier positions are in loss: When the float lack of the earlier place exceeds the required worth, the present order to be entered and the earlier order execute a breakeven technique.

  • —Loss Threshold (in factors): If the above choice is true, set the floating loss worth right here.

  • Shut Positions When reverse sign: When the entry sign exhibits a sign in the other way, Shut Place.

  • Sign Inverting: When we have to commerce in the other way of the entry sign, we are able to set this feature to True. For instance, when our entry sign selects MarketStructurue, we promote when a Bull BOS happens, and purchase when a Bear BOS happens.

  • Commerce Solely in Outlined Kill zone:  Buying and selling Window, If set to false, the trades will run all the day. If set to true, it’s essential to set the beginning and ending hours of your kill zone.

  • —Killzone Start Hour(0-23):  Beginning hour of the kill zone

  • —Killzone Start Minute(0-59):  Beginning minute of the kill zone

  • —Killzone Finish Hour(0-23):  Ending hour of the kill zone

  • —Killzone Finish Minute(0-59):  Ending minute  of the kill zone

  • Shut Positions at Sure Time:  If true, the EA will shut all promote or purchase trades on the outlined shut place time.

  • —Hour to Shut Positions(0-23):  Closing Hour of all open positions

  • —Minute to Shut Positions(0-59):  Closing Minute of all open positions

  • Cancel Orders at Sure Time:   If true, the EA will delete all pending orders on the outlined delete orders time.

  • —Hour to Cancel Orders(0-23):  Deleting Hour of all open orders

  • —Minute to Cancel Orders(0-59):  Deleting Minute of all open orders

  • Use Every day Revenue Restrict: This can mean you can activate the every day revenue limitation. 

  • —Max Every day Revenue %:

  • Use Every day Drawdown Restrict:  This can mean you can activate the every day drawdown limitation. 

  • Max Every day DD %:

———–Composite-Candle Sign Parameter settings———–

  1. Composite-Candle is bull/bear: This system detects the candles of the most recent 3 to ‘ Max Vary for Sample Search ‘. If their worth fluctuation is bigger than the set ‘ Minimal Fluctuation Vary of Value (in ATR) ‘, these candles are mixed into one Candle. If the higher shadow of this mixed Candle is lower than the Shadow Small’ and decrease shadow of this mixed Candle is higher than ‘ Shadow Massive, it can generate an extended sign. If the decrease shadow of this mixed Candle is lower than the Shadow Small’ and higher shadow of this mixed Candle is higher than ‘ Shadow Massive, it can generate a brief sign.
  2. Composite-Candle is bull/bear and Value close to the Swing Excessive/Low: When a mixed Candle that meets the situations seems and it seems close to Swing Excessive/Low, it generates a bull/bear sign.
  1. Commerce at Market Value: When there’s a bullish or bearish sign, instantly enter on the market worth.
  • —Max Vary for Sample Search(in bars): Set the utmost search variety of candles.

  • —Minimal Fluctuation Vary of Value(in ATR):  Set the minimal worth fluctuation vary for Composite-Candle.

  • —ATR Interval for Candles:  Set the ATR Interval to find out the magnitude of worth fluctuations.

  • —Shadow Massive for Candles Sample: Multiply this worth by the distinction between the excessive and low of the mixed candle.

  • —Shadow Small for Candles Sample: Multiply this worth by the distinction between the excessive and low of the mixed candle.

  • —Candles Mode Utilization: 3 modes to select from. By default, choose Traditional mode.

  1. Traditional:  shadow_h=high-((open>shut)?open:shut); shadow_l=((open<shut)?open:shut)-low;
  2. Trendy 1:  shadow_h=high-close; shadow_l=((open<shut)?open:shut)-low;
  3. Trendy 2:  shadow_h=high-close; shadow_l=open-low;
  1. Not Set: 
  2. Excessive/Low of the Composite-Candle: Use the excessive and low factors of the mixture candle as a cease loss.

———–MA Sign Parameter settings———–

  1. Shut Value Above/Beneath the indicator
  2. CloseP above MA, OpenP beneath MA, MA is upwards
  3. CloseP and OpenP above MA, LowP beneath MA, MA is upwards
  1. Commerce at Market Value: When there’s a bullish or bearish sign, instantly enter on the market worth.
  • —MA Interval

  • —MA Shift

  • —MA Methodology

  • —MA Utilized 

———–MACD Sign Parameter settings———–

  1. MACD line is upwards
  2. MACD line has a reverse
  3. Search for an intersection of the primary and sign line
  4. Search for an intersection of the primary line and the zero degree
  5. Search for the “divergence” sign
  6. Search for the “double divergence” sign
  1. Commerce at Market Value: When there’s a bullish or bearish sign, instantly enter on the market worth.

———–RSI Sign Parameter settings———–

  1. Oscillator is directed upwards/downwards
  2. Seek for a reverse of the oscillator upwards/downwards behind the extent of overselling/overbuying
  3. Seek for the “failed swing” sign
  4. Seek for the “divergence” sign
  5. Seek for the “double divergence” sign
  6. Seek for the “head/shoulders” sign
  1. Commerce at Market Value : When there’s a bullish or bearish sign, instantly enter on the market worth.

———–WPR Sign Parameter settings———–

  1. the oscillator is directed upwards
  2. seek for a reverse of the oscillator upwards behind the extent of overselling
  3. seek for the “divergence” sign
  1. Commerce at Market Value : When there’s a bullish or bearish sign, instantly enter on the market worth.

———–BreakerBlocks Sign Parameter settings———–

  1. BB shaped and LowP above BB backside or HighP beneath BB high
  1. Commerce at Market Value: When there’s a bullish or bearish sign, instantly enter on the market worth.
  2. Commerce at Block Value: Commerce at Breaker Block Value.
  3. Imply threshold Value: Commerce on the imply threshold worth of the Block.
  • —BB iStructure Algo: Inner MS algorithm choose.

  • —BB iStructure Break Kind: Break Kind for Inner MS.

  • —BB iStructure Size:  Depth for indicator to research inner market construction.

  • —BB sStructure Algo:  Swing MS algorithm choose.

  • —BB sStructure Break Kind:  Break Kind for swing MS.

  • —BB sStructure Size:  Depth for indicator to research swing market construction.

  • Choose SL Kind Supplied by this Sign:  If the SL TYPE is about to “SL Supplied by Entry Sign” within the basic settings part, then the SL Kind set right here might be used for the order.

  1. Not Set
  2. Breaker Block Excessive/Low:  Use the excessive and low factors of the breaker block as a cease loss.
  3. N-Form Excessive/Low:  Use the excessive and low factors of the N-Form as a cease loss.

———–BSL/SSL Sign Parameter settings———–

  1. BSL/SSL shaped,LowP above BSL or HighP beneath SSL
  2. BSL/SSL shaped
  1. Commerce at Market Value:  When there’s a bullish or bearish sign, instantly enter on the market worth.
  2. Imply threshold Value: 
  • —BSL/SSL iStructure Algo:  Inner MS algorithm choose.

  • —BSL/SSL iStructure Break Kind:  Break Kind for Inner MS.

  • —BSL/SSL iStructure Size:  Depth for indicator to research inner market construction.

  • —BSL/SSL sStructure Algo:  Swing MS algorithm choose.

  • —BSL/SSL sStructure Break Kind:  Break Kind for swing MS.

  • —BSL/SSL sStructure Size:  Depth for indicator to research swing market construction.

  • Choose SL Kind Supplied by the Sign:  If the SL TYPE is about to “SL Supplied by Entry Sign” within the basic settings part, then the SL Kind set right here might be used for the order.

  1. Not Set 
  2. BSL/SSL Area Excessive/Low

———–FiboRe Sign Parameter settings———–

  1. FiboRe exceeding set worth: Fibo-Re degree exceeding ‘FiboRe MinRe‘ and fewer than ‘FiboRe MaxRe‘.
  1. Commerce at Market Value:  When there’s a bullish or bearish sign, instantly enter on the market worth.
  2. The Value of Max FiboRe Pre-set: Most degree worth of Fibo-Retracement.
  3. The Value of Min FiboRe Pre-set: Minimal degree worth of Fibo-Retracement.
  • —FiboRe iStructure Algo:   Inner MS algorithm choose.

  • —FiboRe iStructure Break Kind: Break Kind for Inner MS.

  • —FiboRe iStructure Size: Depth for indicator to research inner market construction.

  • —FiboRe sStructure Algo: Swing MS algorithm choose.

  • —FiboRe sStructure Break Kind: Break Kind for swing MS.

  • —FiboRe sStructure Size: Depth for indicator to research swing market construction.

  • —FiboRe FBR Kind: Select Inner MS or Swing MS for Fibo-Re.

  • —FiboRe MinRe for Sign: Minimal degree for Fibo-Re.

  • —FiboRe MaxRe for Sign: Most degree for Fibo-Re.

  • Choose SL Kind Supplied by the Sign:  If the SL TYPE is about to “SL Supplied by Entry Sign” within the basic settings part, then the SL Kind set right here might be used for the order.

  1. Not Set
  2. Market Construction Excessive/Low 
  3. Consumer Set Fibo-Re Stage for SL: Set the required Fibo-Re degree worth within the following settings.

———–FVG Sign Parameter settings———–

  1. FVG shaped
  2. FVG shaped and three bull/bear candles in a row sample
  1. Commerce at Market Value: When there’s a bullish or bearish sign, instantly enter on the market worth.
  2. Imply threshold Value of the FVG: 
  3. FVG Prime/Btm Value: Prime/Btm Value of the FVG Block.
  • —FVG Interval: The timeframe parameter of the FVG.

  • —FVG Stuffed Kind: Choose FVG stuffed kind.

  • —FVG MiniSize Filter: FVG Threshold (minval=0.1, step=0.1).

  • Choose SL Kind Supplied by the Sign:  If the SL TYPE is about to “SL Supplied by Entry Sign” within the basic settings part, then the SL Kind set right here might be used for the order.

  1. Not Set
  2. FVG Block Excessive/Low: 
  3. FVG 3 Candles Excessive/Low: The excessive and low factors of the three candles that kind FVG.

———–Killzone Sign Parameter settings———–

  1. Value break KZ:  Inside the set KILLZONE time, the value will kind an oblong space. When the value breaks by the excessive and low factors of this rectangular space, a sign is generated. For instance, we are able to set the time of KZ for AsiaRange and enter lengthy or brief positions when the value breaks by the excessive and low factors of AsiaRange.
  2. Prohibited commerce exterior the KZ time: This mode is especially used to set the time interval for buying and selling, with out buying and selling exterior the interval. 
  1. Commerce at Market Value:  When there’s a bullish or bearish sign, instantly enter on the market worth.
  2. Imply threshold Value: Use the center worth of Killzone because the open worth.
  • —Killzone Start Hour:  Beginning hour of the kill zone

  • —Killzone Start Minute:  Beginning minute of the kill zone

  • —Killzone Finish Hour:  Ending hour of the kill zone

  • —Killzone Finish Minute:  Ending minute  of the kill zone

  • —Killzone Label Textual content: This parameter specifies the KZ label textual content that may let straightforward to view on the chart.

  • —Killzone Present Final: This parameter is about to show the utmost variety of KZ rectangles on the chart.

  • —Killzone Present Predict: This parameter is about to show the expected Stage on the chart.

  • Choose SL Kind Supplied by the Sign:  If the SL TYPE is about to “SL Supplied by Entry Sign” within the basic settings part, then the SL Kind set right here might be used for the order.

  1. Not Set
  2. KZ ZONE Excessive/Low: Use the excessive and low factors of the KZ area as cease loss for orders. 

———–Market Construction Sign Parameter settings———–

  1. MS shaped: CHOCH(MSS) and BOS shaped sign.
  2. CHOCH shaped:  CHOCH(MSS) shaped sign.
  3. BOS shaped: BOS shaped sign.
  1. Commerce at Market Value: When there’s a bullish or bearish sign, instantly enter on the market worth.
  2. Imply threshold Value: Center worth of MS construction
  3. MS Prime/Backside Value: The excessive and low factors of MS construction
  • —MS Construction Algo:  MS algorithm choose.

  • —MS Construction Break Kind:  Break Kind for MS.

  • —MS Construction Size(Depth):  Depth for indicator to research market construction.

  • Choose SL Kind Supplied by the Sign:  If the SL TYPE is about to “SL Supplied by Entry Sign” within the basic settings part, then the SL Kind set right here might be used for the order.

  1. Not Set
  2. Market Construction Excessive/Low 

———–NWOG/NDOG Sign Parameter settings———–

  1. NWOG shaped and CloseP above/beneath NWOG
  2. Value callback to NWOG area
  3. NDOG shaped and CloseP above/beneath NDOG
  4. Value callback to NDOG area
  1. Commerce at Market Value
  2. Meanthreshold Value
  1. Not Set
  2. NWOG/NDOG Block Excessive/Low

———–OrderBlock Sign Parameter settings———–

  1. OB/iOB shaped: Swing OrderBlocks and Inner OrderBlocks shaped alerts.
  2. OB/iOB touched:  Swing OrderBlocks and Inner OrderBlocks touched alerts.
  3. OB/iOB break:  Swing OrderBlocks and Inner OrderBlocks break alerts.
  4. OB shaped
  5. iOB shaped
  6. OB touched
  7. iOB shaped
  8. OB break
  9. iOB break
  1. Commerce at Market Value
  2. Meanthreshold Value: Meanthreshold Value of the Order Block
  3. OB Prime/Btm Value: Prime or Backside Value of the Order Block
  • —OB iStructure Algo: Inner MS algorithm choose.

  • —OB iStructure Break Kind:  Break Kind for inner MS.

  • —OB iStructure Size:  Depth for indicator to research inner market construction.

  • —OB sStructure Algo:  Swing MS algorithm choose.

  • —OB sStructure Break Kind:  Break Kind for swing MS.

  • —OB sStructure Size:  Depth for indicator to research swing market construction.

  • Choose SL Kind Supplied by the Sign:  If the SL TYPE is about to “SL Supplied by Entry Sign” within the basic settings part, then the SL Kind set right here might be used for the order.

  1. Not Set
  2. OB Block Excessive/Low

===========INPUTS FOR TRAILING===========

  1. Trailing_None: Don’t use the Trailing technique.
  2. Trailing_FixedPips: When the revenue of place will increase with worth modifications, SL and TP will alter in response to the present worth to take care of a set fastened worth.  The algorithm of FixedPip Trailing is that when the distinction between the value and SL is bigger than the set worth (cease loss trailing degree), SL strikes up with the value (assuming purchase order), and TP is reset to the present worth plus take revenue monitoring degree.
  3. Trailing_Breakeven: When the POS revenue exceeds the worth we set (‘X’ pips or ‘X’ Danger), alter SL to Open Value.
  4. Trailing_MA: Use the present worth of MA because the SL for Pos.
  5. Trailing_Max_Move:  When the lack of place will increase with worth modifications, TP will alter in response to the present worth to take care of a set fastened worth (‘MaxPositive Transfer degree’).  When the revenue of place will increase with worth modifications, SL will alter in response to the present worth to take care of a set fastened worth ( MaxNegative Transfer degree’). 
  6. Trailing_ParabolicSAR:  Use the present worth of ParabolicSAR because the SL for Pos.
  7. Trailing_MS_Step: If the Trailing Kind is chosen as Revenue Path, EA will monitoring the formation of MS, when there may be an MS formation (choch, bos), then dynamically adjusting TP to the present revenue * ‘The share of step1’. When a second MS is shaped, alter TP to the present revenue * ‘The share of steps 2’, and so forth.  If the Trailing Kind is chosen as Loss Path, EA will monitoring the formation of MS, when there may be an MS formation (choch, bos), then dynamically adjusting SL to the present LOSS* ‘The share of step1’. When a second MS is shaped, alter SL to the present LOSS* ‘The share of steps 2’, and so forth.

———–FixedPips Trailing Parameter settings———–

  • —Cease Loss trailing degree (in pips):   If the variety of decimal digits of the value is 3 or 5, 1Pips = 10Points, else 1Pips = 1Point.

  • —Take Revenue trailing degree (in pips):   If the variety of decimal digits of the value is 3 or 5, 1Pips = 10Points, else 1Pips = 1Point.

———–Breakeven Trailing Parameter settings———–

  • Choose Breakeven Kind

  • —“X” Worth (in pips):   If the variety of decimal digits of the value is 3 or 5, 1Pips = 10Points, else 1Pips = 1Point.  

  • —“X” Danger to Reward

———–MA Trailing Parameter settings———–

  • —Trailing MA Interval

  • —Trailing MA Shift

  • —Trailing MA Methodology

  • —Trailing MA Utilized 

———–MaxMove Trailing Parameter settings———–

  • —MaxPositive Transfer degree (in pips):   If the variety of decimal digits of the value is 3 or 5, 1Pips = 10Points, else 1Pips = 1Point.

  • —MaxNegative Transfer degree (in pips)

———–ParabolicSAR Trailing Parameter settings———–

———–MarketStructureStep Trailing Parameter settings———–

  1. Revenue Path: Solely observe and alter TP.
  2. Loss Path: Solely observe and alter SL.
  3. Each Revenue and Loss Path
  1. Path solely identical route MS: Whether it is Lengthy Place, solely observe bull MS. Quite the opposite, if it’s a brief place, solely observe bear MS.
  2. Path all MS
  • —The share of step1

  • —The share of step2

  • —The share of step3

  • —The share of step4

  • —MS Construction Algo

  • —MS Construction Size(Depth)

===========INPUTS FOR MONEY===========

  1. Money_None:  No Cash Technique might be utilized. By default, the minimal lot is used for buying and selling.
  2. Money_FixedLot: Every order makes use of a hard and fast lot (‘Mounted quantity’).
  3. Money_FixedMargin: The quantity of funds used for every order is a hard and fast p.c margin.
  4. Money_FixedRisk: The funding required for SL for every order is a hard and fast p.c danger.
  5. Money_SizeOptimized: 

———–FixedLot Cash Parameter settings———–

———–FixedMargin Cash Parameter settings———–

  • —Share of margin

———–FixedRisk Cash Parameter settings———–

———–SizeOptimized Cash Parameter settings———–

  • —Lower issue

  • —Share

===========INPUTS FOR TIMEFRAME1 FILTER SIGNAL===========

———–Normal Settings———–

  • —Choose TimeFrame1 for Filters: EA means that you can add two TF sign filters, which might be the present TF or a special HTF, beneath every TF, you may select so as to add a number of filters. So, we are able to add a number of filters beneath the present TF or add filters beneath completely different HTFs as wanted. For instance, if our present buying and selling interval is 15m and the entry sign is FVG, I can select so as to add two MA filters beneath the present TF By setting Timeframe1 and Timeframe2 to Present, and activate MA filter, that are the 20 MA and the 60 MA. The filter sign mode selects the value above the transferring common. So the entry situation turns into when there’s a bull FVG shaped and the value is above the 2 transferring averages, then we’ll purchase. Quite the opposite, when there may be Bear FVG shaped and the value is beneath the 2 transferring averages, then we’ll promote.

  • – We will open 0 to N filters beneath Timeframe1 and Timeframe2, and SMC-EA will solely execute purchase and promote commerce when all these filters and entry alerts generate alerts in the identical route concurrently.

———–Candles Filter Parameter settings———–

  • Flip On/Off Candles Sign filter On TimeFrame1: Is that this sign enabled as a filtering sign beneath TF1.

  • —ATR Interval

  • —Max Vary for Sample Search(in bars)

  • —Minimal Fluctuation Vary of Value(in ATR) 

  • —Shadow Massive for Candles Sample

  • —Shadow Small for Candles Sample 

  • —Candles Mode 

  • Final Sign Expiration(Candles nums): Some alerts are solely generated on a sure candle, and when utilizing them as filters, we would like them to generate alerts on a number of consecutive candles, so we have to set Sign Expiration for them. For instance, we use FVG because the entry sign, Timeframe1 selects Present, Activate MACD sign because the filter, and choose “Search for an intersection of the primary and sign traces” because the sign mode. The MACD sign is just generated when the primary and sign traces intersect. If there isn’t a FVG shaped sign at the moment, the buying and selling situations won’t be met. Due to this fact, we have to set the Sign Expiration for the MACD sign. Assuming it’s set to 7, within the 7 candles after the primary and sign traces intersect, if there may be an FVG shaped sign, it may be generated a Buying and selling sign.

  • Sign Inverting: When the sign itself generates bullish sign, cross the bearish route because the filtering sign to the entry sign.

  • Choose SL Kind Supplied by the Sign:  If the SL TYPE is about to “SL Supplied by Filter” within the Entry Sign part, then the SL Kind set right here might be used for the order.

  • Choose TP Kind Supplied by the Sign:  If the TP TYPE is about to “TP Supplied by Filter” within the Entry Sign part, then the TP Kind set right here might be used for the order.

———–MA Filter Parameter settings———–

———–MACD Filter Parameter settings———–

———–RSI Filter Parameter settings———–

———–WPR Sign Parameter settings———–

———–BreakerBlocks Filter Parameter settings———–

———–BSL/SSL Filter Parameter settings———–

———–FiboRe Filter Parameter settings———–

———–FVG Filter Parameter settings———–

———–Killzone Filter Parameter settings———–

———–Market Construction Filter Parameter settings———–

———–NWOG/NDOG Filter Parameter settings———–

———–OrderBlock Filter Parameter settings———–

===========INPUTS FOR TIMEFRAME2 FILTER SIGNAL===========

———–Normal Settings———–

  • —Choose TimeFrame2 for Filters: You possibly can select Present, equal to Timeframe1, or completely different from TF1.

———–Candles Filter Parameter settings———–

  • Flip On/Off Candles Sign filter On TimeFrame2

  • —ATR Interval

  • —Max Vary for Sample Search(in bars)

  • —Minimal Fluctuation Vary of Value(in ATR) 

  • —Shadow Massive for Candles Sample

  • —Shadow Small for Candles Sample 

  • —Candles Mode  

  • Final Sign Expiration(Candles nums)

  • Sign Inverting

  • Choose SL Kind Supplied by the Sign

  • Choose TP Kind Supplied by the Sign

———–MA Filter Parameter settings———–

———–MACD Filter Parameter settings———–

———–RSI Filter Parameter settings———–

———–WPR Sign Parameter settings———–

———–BreakerBlocks Filter Parameter settings———–

———–BSL/SSL Filter Parameter settings———–

———–FiboRe Filter Parameter settings———–

———–FVG Filter Parameter settings———–

———–Killzone Filter Parameter settings———–

———–Market Construction Filter Parameter settings———–

———–NWOG/NDOG Filter Parameter settings———–

———–OrderBlock Filter Parameter settings———–

===========INPUTS FOR STOPLOSS FILTER SIGNAL===========

  • – We will select to make use of dynamic cease loss as a substitute of setting an SL when the order enters, which suggests stopping loss instantly when a specified sign is generated. The SL Filtering Sign module is ready for this objective. You possibly can select to allow a number of alerts within the settings beneath, and every sign can run on the identical or completely different TF.

———–Candles Filter Parameter settings———–

  • Choose TimeFrame for Filters

  • Flip On/Off Candles Sign filter

  • —ATR Interval

  • —Max Vary for Sample Search(in bars)

  • —Minimal Fluctuation Vary of Value(in ATR) 

  • —Shadow Massive for Candles Sample

  • —Shadow Small for Candles Sample

  • —Candles Mode 

  • Final Sign Expiration(Candles nums)

  • Sign Inverting

===========INPUTS FOR TAKEPROFIT FILTER SIGNAL===========

  • – We will select to make use of dynamic take revenue as a substitute of setting an TP when the order enters, which suggests taking revenue instantly when a specified sign is generated. The TP Filtering Sign module is ready for this objective. You possibly can select to allow a number of alerts within the settings beneath, and every sign can run on the identical or completely different TF.

———–Candles Filter Parameter settings———–

  • Choose TimeFrame for Filters

  • Flip On/Off Candles Sign filter

  • —ATR Interval

  • —Max Vary for Sample Search(in bars)

  • —Minimal Fluctuation Vary of Value(in ATR) 

  • —Shadow Massive for Candles Sample

  • —Shadow Small for Candles Sample

  • —Candles Mode 

  • Final Sign Expiration(Candles nums)

  • Sign Inverting

===========INPUTS FOR NEWS FILTER===========

  • Allow Information Filter:   Select to keep away from buying and selling through the information. This implies posting new positions or orders and likewise taking management of present open positions or orders.

  • Contemplate Low Influence Occasions:  True/False

  • Contemplate Medium Influence Occasions:  True/False

  • Contemplate Excessive Influence Occasions:  True/False

  • —Cease Earlier than Information:  Resolve when to cease taking new trades earlier than information.

  • —Begin After Information:  Resolve when to begin taking new trades after information.

  • Currencies Verify:  Select the impacted currencies like  “USD,EUR,AUD,NZD,JPY,CAD,GBP”, or  “USD,EUR”.

  • Verify Particular Information: Whether or not to make use of key phrases to filter specified Information.

  • Particular Information Key phrases: 

  • Choose Motion On Commerce When Information:

  1. Maintain Present Commerce     
  2. Shut All Commerce
  3. Shut Successful Commerce
RELATED ARTICLES

Most Popular

Recent Comments